-
This is the DarkSide Custom Harleys guaranteed >200HP package! It's been the countless hours & multiple improvements made over the years that make this kit perform flawlessly. We've proven this kit to be reliable for everyday riding, it runs perfect with it's cooling system & it sits nice & tidy for comfort on those longer trips. Not only are you getting an enormous power increase, but the look & sound of the supercharger does not compare. Ordering this kit through the DarkSide team does not stop there, we're only a phone call away to assist you through the installation process. We're available to answer all your questions and & also to guide you to achieve your horsepower goal. Kit includes:
- Rotrex Supercharger - C30-74
- Air filter
- Intake plenum
- Intake plenum breather system
- Main side plate
- Supercharger side plate
- Oiling system
- 1L bottle of supercharger specific oil
- Main drive shaft & pulley
- Idle tensioner & pulley
- Belt
- Blow off valve
- Air temperature sensor
- Injectors
- Fuel pressure regulator
- Silicone joiners & clamps
- All mounting nuts & bolts
- Instructions available on request
- Custom front mount intercooler
- High performance cams
- Metal head gaskets
- High performance head studs
- Heavy duty clutch
- High volume fuel pump & relay
- Power Commander V ECU Tuner
- Dyno tune
-
If you're considering a huge power increase for your V-Rod, forced induction is the way to go, instantly adding 70HP - 90HP to your current setup. It’s been the countless hours & multiple improvements made over the years that make this kit perform flawlessly. We’ve proven this kit to be reliable for everyday riding, it runs perfect with it’s cooling system & it sits nice & tidy for comfort on those longer trips. Not only are you getting an enormous power increase, but the look & sound of the supercharger does not compare. Ordering this kit through the DarkSide team does not stop there, we’re only a phone call away to assist you through the installation process. We’re available to answer all your questions and & also to guide you to achieve your horsepower goal. Kit includes:
- Rotrex Supercharger - C15-60
- Air filter
- Intake plenum
- Intake plenum breather system
- Main side plate
- Supercharger side plate
- Oiling system
- 1L bottle of supercharger specific oil
- Main drive shaft & pulley
- Idle tensioner & pulley
- Belt
- Blow off valve
- Air temperature sensor
- Injectors
- Fuel pressure regulator
- Silicone joiners & clamps
- All mounting nuts & bolts
- Instructions available on request
- Heavy duty clutch
- Power Commander V ECU Tuner
- Dyno tune
-
Our Turbine Style Rim is available for a variety of models. Machined from a solid block & to the highest of quality. Wheels come with bearings pressed in and ready for install, suited for ABS and non-ABS applications. The 23" Turbine Rim is 3D machined & the 26" is 2D machined. Colour Options:
- Gloss Black
- Polished Chrome
- Contrast Cut 1 - Black Turbines
- Contrast Cut 2 - Polished Turbines
-
- Manufacturer Part No: HHI-2640-VRX-B-800A-ADP-B
- Manufactured by Hawg Halters Inc. in the USA
- High quality oversized replica of the OEM 19" Night Rod rim found on 2012-2017 Night Rod Special models
- Machined from billet 6061-T6 billet aluminium
- Gloss black powder coated finish
- Installation may require additional components depending on application
-
EXCLUSIVE to DarkSide Custom Harleys, this is the lowest sitting air suspension setup on the market available for your V-Rod.
- Fits 2007-2017 V-Rod models
- Available in black or chrome
- Billet 6061-T6 construction
- Adjustable rebound control
- Maximum raised height - 13"
- Minimum lowered height - <10"
- 2 x DarkSide spec FOX shock absorbers with rebound adjustment
- 1 x High output compressor
- 1 x Handlebar toggle switch
- 1 x Air distribution valve
- 1 x Fused wiring harness
- 1 x Relay
- All mounting hardware
- Nylon air tubing
- Cable ties
- Installation may require additional components or custom work depending on application
-
DarkSide has been supplying Arnott Air Ride kits for many years, they have just proven to be the best air suspension setup on the market available for your V-Rod.
- Manufacturer Part No. MC-3110
- Fits 2007-2017 V-Rod models
- Billet 6061-T6 construction
- Adjustable rebound control
- Maximum raised height - 13"
- Minimum lowered height - 10.5"
- 2 x FOX shock absorbers
- 1 x High output compressor
- 1 x Handlebar toggle switch
- 1 x Air distribution valve
- 1 x Fused wiring harness
- 1 x Relay
- All mounting hardware
- Nylon air tubing
- Cable ties
- Installation may require additional components or custom work depending on application
-
- Manufacturer Part No: HHI-2340-VRX-B-800A-ADP-B
- Manufactured by Hawg Halters Inc. in the USA
- High quality oversized replica of the OEM 19" Night Rod rim found on 2012-2017 Night Rod Special models
- Machined from billet 6061-T6 billet aluminium
- Gloss black powder coated finish
- Installation may require additional components depending on application
-
DarkSide has been supplying Arnott Air Ride kits for many years, they have just proven to be the best air suspension setup on the market available for your V-Rod.
- Manufacturer Part No. MC-3112
- Fits 2007-2017 V-Rod models
- Billet 6061-T6 construction
- Maximum raised height - 13"
- Minimum lowered height - 10.5"
- 2 x FOX shock absorbers
- 1 x High output compressor
- 1 x Handlebar toggle switch
- 1 x Air distribution valve
- 1 x Fused wiring harness
- 1 x Relay
- All mounting hardware
- Nylon air tubing
- Cable ties
- Installation may require additional components or custom work depending on application
-
If you're considering forced induction for your V-Rod our custom front mount intercooler is the best way to keep your temperatures down & your power delivery efficient. Our unit sits nice & tidy in front of the stock radiator with plenty of clearance for those custom front wheel setups. Our intercooler is an optional upgrade when installing the DarkSide Custom Harleys Supercharger Kit - V-Rod Stage 1 allowing a slightly more aggressive tune to push power delivery. Our intercooler is 100% necessary when installing the DarkSide Custom Harleys Supercharger Kit - V-Rod Stage 2. Available in your choice of raw or black. All intercoolers are fabricated & made to order, so be sure to let us know what kit you're running so we can supply the correct setup. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
Upgrade your conrods to a forged set from CP Carrillo. Specs as follows:
- Manufacturer Part No: PSR6161
- Fully CNC machined
- Balanced to +/- 1g
- Designed for maximum performance, horsepower & reliability
- Complete kit includes 2 x conrods
- Suitable for Twin Cam models 2007 - 2017
- Installation may require additional components depending on application
-
Upgrade your conrods to a forged set from CP Carrillo. Specs as follows:
- Manufacturer Part No: PSR10087
- Fully CNC machined
- Balanced to +/- 1g
- Designed for maximum performance, horsepower & reliability
- Complete kit includes 2 x conrods
- Installation may require additional components depending on application
-
Upgrade your conrods to a forged set from CP Carrillo. Specs as follows:
- Manufacturer Part No: car-PSR5367
- Fully CNC machined
- Balanced to +/- 1g
- Designed for maximum performance, horsepower & reliability
- Complete kit includes 2 x conrods
- Installation may require additional components depending on application
-
A very popular exhaust since its release here at DarkSide, consistently pushing out great numbers on bike with a variety of engine builds from simple cam upgrades through to 128ci or even boosted applications.
- Manufacturer Part No: 135-71670
- Made from stainless steel & all TIG welded
- High flow 1.75" to 1.875" to 2" stepped header pipes
- Adjustable turnout muffler
- Works with 12mm or 18mm O2 sensors
- Fits 2017-later Milwaukee 8 Softail models
- Installation may require additional work & components depending on application
- Full custom dyno tune required after installation
-
Made by Hawg Halters Inc. (HHI) to suit 2018-Up Harley-Davidson Breakout with OEM headlight setup.
- Manufacturer Part No: 49BKAR4 (Black) & 49BKCR4 (Chrome)
- These triple trees allow the correct installation of a 23" front rim conversion
- Constructed of billet aluminium
- Direct replacement for factory triple trees, no frame modifications required
- Available in black or chrome
- Installation may require additional components
-
Made by Hawg Halters Inc. (HHI) to suit 2018-Up Harley-Davidson Breakout with OEM headlight setup.
- Manufacturer Part No: 49BKAR6 (Black) & 49BKCR6 (Chrome)
- These triple trees allow the correct installation of a 26" front rim conversion
- Constructed of billet aluminium
- Direct replacement for factory triple trees, no frame modifications required
- Available in black or chrome
- Installation may require additional components
-
After very extensive research & development we have collaborated with 'Nitto Performance Engineering' to develop our own forged pistons for your V-Rod. Used in all of our in-house forged motor builds & proven to withstand over 250HP with ease. Those bikes that leave our shop & run 9 second passes? They run these... & so should you!
- Manufacturer Part No: DS-VR-4134
- Designed in collaboration with 'Nitto Performance Engineering' & manufactured by CP Carrillo
- Fully CNC machined & forged from high strength alloy
- Balanced to +/- 1g
- Designed for & used in all of our high performance V-Rod builds including naturally aspirated, Supercharged & Turbo charged
- Complete kit includes 2 x pistons, ring sets, wrist pins & gudgeon pins
- Suitable for VRSC models 2008 - 2017
- Installation may require additional components depending on application
-
After very extensive research & development we have collaborated with 'Nitto Performance Engineering' to develop our own forged conrods for your V-Rod. Used in all of our in-house forged motor builds & proven to withstand over 250HP with ease. Those bikes that leave our shop & run 9 second passes? They run these... & so should you!
- Manufacturer Part No: DS-VR-145
- Fully CNC machined
- Designed for & used in all of our high performance V-Rod builds
- Stock length suitable for OEM or forged pistons
- Complete kit includes 2 x conrods
- Installation may require additional components depending on application
-
Manufactured by Fitzgerald Motorsports out of billet forged steel & designed to suit 2002 - 2017 V-Rod models. Specs: Net Lift - Intake .490 & Exhaust .470 Duration - Intake .050 & Exhaust .250 We've seen incredible gains using these cams & they've proven to be a better replacement than the Screamin' Eagle cams previously offered. Depending on the health of your motor you can expect gains of 10-15% after dyno tuning. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
Upgrade your factory cam plate & oil pump to these high performance versions manufactured by Feuling. Used in many DarkSide high performance Milwaukee 8 builds.
- Manufacturer Part No: 7196
- Billet 6061 aluminium high volume oil pump
- Billet 7075 aluminium anodised high performance cam plate
- Increases oil pressure, oil volume, engine oil flow & return oil scavenging
- May reduce wet sumping & oily air cleaners
- Fits oil cooled Milwaukee 8 models
- Installation may require additional components depending on application
-
Upgrade your factory cam plate & oil pump to these high performance versions manufactured by S&S. Used in many DarkSide high performance Milwaukee 8 builds.
- Manufacturer Part No: 310-0998B
- Both cam plate & oil pump are precision machined from billet aluminium with a blue anodised finish
- Cam plate has removeable passage plugs for servicing
- Oil pump has independent scavenge sections for flywheel cavity & cam chest
- Unit has debris screens in both scavenge pickups with approx. 44% increased flow capacity on feed & approx. 58% on scavenge
- Adjustable pressure relief valve
- Fits oil cooled Milwaukee 8 models
- Installation may require additional components depending on application
-
Upgrade your pistons to a forged set from CP Carrillo. Specs as follows:
- Manufacturer Part No: M5090-12
- Bore: 4.134in.
- Stroke: 2.835in.
- Fully CNC machined & forged from high strength 2618 alloy
- Balanced to +/- 1g
- Double forced pin oilers
- Designed for maximum performance, horsepower & reliability
- Complete kit includes 2 x pistons, ring sets, wrist pins & clips
- 12.0:1 is a higher compression rate than standard (11.5:1) & suitable for stock bore, stock stroke motors
- Follow ring end gap & piston to cylinder clearances as per supplied CP Carrillo instructions
- Installation may require additional components depending on application
-
Upgrade your pistons to a forged set from CP Carrillo. Specs as follows:
- Manufacturer Part No: M5090-14
- Bore: 4.134in.
- Stroke: 2.835in.
- Fully CNC machined & forged from high strength 2618 alloy
- Balanced to +/- 1g
- Double forced pin oilers
- Designed for maximum performance, horsepower & reliability
- Complete kit includes 2 x pistons, ring sets, wrist pins & clips
- 14.0:1 is a higher compression rate than standard (11.5:1) & suitable for stock bore, stock stroke motors
- Follow ring end gap & piston to cylinder clearances as per supplied CP Carrillo instructions
- Installation may require additional components depending on application
-
Upgrade your pistons to a forged set from CP Carrillo. Specs as follows:
- Manufacturer Part No: M5078-14
- Bore: 4.134in.
- Stroke: 3.085in.
- Fully CNC machined & forged from high strength 2618 alloy
- Balanced to +/- 1g
- Double forced pin oilers
- Designed for maximum performance, horsepower & reliability
- Complete kit includes 2 x pistons, ring sets, wrist pins & clips
- 14.0:1 is a higher compression rate than standard (11.5:1) & suitable for stock bore stroker motors
- Follow ring end gap & piston to cylinder clearances as per supplied CP Carrillo instructions
- Installation may require additional components depending on application
-
Upgrade your pistons to a forged set from CP Carrillo. Specs as follows:
- Manufacturer Part No: M5079-14
- Bore: 4.250in.
- Stroke: 3.085in.
- Fully CNC machined & forged from high strength 2618 alloy
- Balanced to +/- 1g
- Double forced pin oilers
- Designed for maximum performance, horsepower & reliability
- Complete kit includes 2 x pistons, ring sets, wrist pins & clips
- 14.0:1 is a higher compression rate than standard (11.5:1) & suitable for big bore stroker motors
- Follow ring end gap & piston to cylinder clearances as per supplied CP Carrillo instructions
- Installation may require additional components depending on application
-
Made by Hawg Halters Inc. (HHI), these custom triple trees are made of billet aluminum & allow the correct installation of a 26" front rim conversion. Manufactured to suit 2002-2011 Harley-Davidson V-Rod with conventional front end & OEM headlight setup. Direct replacement for factory triple trees, no modifications required. Available in black. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
Made by Hawg Halters Inc. (HHI), these custom triple trees are made of billet aluminum & allow the correct installation of a 23" front rim conversion. Manufactured to suit 2002-2011 Harley-Davidson V-Rod with conventional front end & OEM headlight setup. Direct replacement for factory triple trees, no modifications required. Available in black. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
Made by Hawg Halters Inc. (HHI), these custom triple trees are made of billet aluminum & allow the correct installation of a 23" front rim conversion. Manufactured to suit 2012-2017 Harley-Davidson V-Rod with inverted front end & OEM headlight setup. Direct replacement for factory triple trees, no modifications required. Available in black. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
Made by Hawg Halters Inc. (HHI), these custom triple trees are made of billet aluminum & allow the correct installation of a 26" front rim conversion. Manufactured to suit 2012-2017 Harley-Davidson V-Rod with inverted front end & OEM headlight setup. Direct replacement for factory triple trees, no modifications required. Available in black. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
The Scorpion Billet Clutch features a greatly increased clutch surface area (compared to stock) and includes a CNC machined billet aluminum pressure plate, friction plates, steel plates, a steel inner hub, and multiple sets of coil springs to allow you to tune the clutch to your needs. The Scorpion can also be run wet or dry in an open or enclosed primary and is designed to fit into the stock type clutch basket. This unit is perfect for high performance applications & we recommend it for all Twin Cam engine upgrades. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
The Scorpion Billet Clutch features a greatly increased clutch surface area (compared to stock) and includes a CNC machined billet aluminum pressure plate, friction plates, steel plates, a steel inner hub, and multiple sets of coil springs to allow you to tune the clutch to your needs. This unit is perfect for high performance applications & we recommend it for all our Milwaukee 8 engine upgrades and our Milwaukee 8 Supercharger Kits. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
If you're pushing big power, this is the upgrade you need to ensure your V-Rod clutch is secure & performing to its full potential.
- Rated for power outputs in excess of 300HP
- Includes mounting bolts & lock tabs for installation
- Direct replacement for OEM clutch basket
- Hard anodised finish for added durability
-
Upgrade your factory cylinder studs & head bolts to these high performance versions manufactured by ARP for Feuling. Used in all DarkSide high performance Milwaukee 8 builds.
- Manufacturer Part No: 3024
- Measurements: 7/16in. x 6.250in. (studs)
- Heat treated 8740 chrome moly steel studs
- Special alloyed stainless steel head bolts
- Designed for maximum performance, horsepower & reliability
- Reusable with precision J Form threads for optimum engagement to prevent galling & promote more consistent torque loading
- Kit includes 8 x cylinder studs, 8 x head bolts, moly assembly lubricant & thread sealant
- Installation requires specific torque specs & methods
-
Upgrade your pistons to a forged set from CP Carrillo. Specs as follows:
- Manufacturer Part No: M5090
- Bore: 4.134in.
- Stroke: 2.835in.
- Fully CNC machined & forged from high strength 2618 alloy
- Balanced to +/- 1g
- Double forced pin oilers
- Designed for maximum performance, horsepower & reliability
- Complete kit includes 2 x pistons, ring sets, wrist pins & clips
- 9.5:1 is a lower compression rate than standard (11.5:1) & suitable for boosted applications
- Follow ring end gap & piston to cylinder clearances as per supplied CP Carrillo instructions
- Installation may require additional components depending on application
-
If you're pushing big power, this is the upgrade you need to ensure your Milwaukee 8 clutch is secure & performing to its full potential. Precision machined from 2024-T3 billet aluminium and hard anodised, this basket is superior in quality and durability to the stock basket.
- Manufacturer Part No: B-321-30-02017
- Suitable for Touring 2017-up
- Suitable for Softail 2018-up
- Direct replacement for OEM clutch basket
-
Produced by Russ Wernimont Designs (RWD) in the USA, these are the highest quality wrap around fenders to suit the big wheel upgrade on your Breakout.
- Manufacturer Part No. RWD-50272
- Fits both Twin Cam & Milwaukee 8 Breakout models
- Suitable when fitting a 26" front wheel upgrade
- Measures 6" wide & best suited with a 120-130 wide tyre on your rim
- Fender comes unpainted & will require prep work & paint prior to fitment
- Please test fit on your bike prior to paint
- Installation may require additional components or custom work depending on application
-
If you ride your Milwaukee 8 Harley-Davidson hard & want to extend the life of your clutch, the upgraded Clutch Basket from TTS Performance is an excellent choice.
- Machined from aerospace grade 7075 aluminium
- Far superior material than the cast factory basket
- Includes high grade EN16T heavy duty steel backplate
- Direct bolt on replacement
- Installed with 6 x high tensile bolts using special anti back out helicoils
-
If you're pushing big power, this is the upgrade you need to ensure your Milwaukee 8 clutch is secure & performing to its full potential.
- Manufacturer Part No: TP-TM-2017
- Suitable for Touring 2017-up
- Suitable for Softail 2018-up
- Rated for power outputs in excess of 300HP
- Includes mounting bolts & lock tabs for installation
- Direct replacement for OEM clutch basket
- Hard anodised finish for added durability
-
Low profile design fits under stock primary cover, but the added support for hard riding. This unit is perfect for high performance applications & we recommend it for all Twin Cam engine upgrades. PLEASE NOTE: This kit requires fitment of the Barnett Scorpion Clutch. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
Produced by Russ Wernimont Designs (RWD) in the USA, these are the highest quality wrap around fenders to suit the big wheel upgrade on your Breakout.
- Manufacturer Part No. RWD-50140
- Fits both Twin Cam & Milwaukee 8 Breakout models
- Suitable when fitting a 23" front wheel upgrade
- Measures 6" wide & best suited with a 130 wide tyre on your rim
- Fender comes unpainted & will require prep work & paint prior to fitment
- Please test fit on your bike prior to paint
- Installation may require additional components or custom work depending on application
-
Low profile design fits under stock primary cover, but the added support for hard riding. Exclusive to DarkSide Custom Harleys, we can offer the lock-up pressure plate to suit your Harley-Davidson Milwaukee 8 Softail. This unit is perfect for high performance applications & we recommend it for all our Milwaukee 8 engine upgrades and our Milwaukee 8 Supercharger Kits. PLEASE NOTE: This kit requires the fitment of the Barnett Scorpion Clutch. Additional components are included in this kit for fitment to your Harley-Davidson Milwaukee 8 Softail. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
Our new rear drive pulley to suit OEM Night Rod Special rims is now here & the highest quality option available on the market.
- Manufacturer Part No: DS-VR-RP-B
- Fully CNC machined from high quality billet & powder coated in gloss black
- Designed to suit NRS style rims on 2012 - 2017 V-Rod Night Rod Special models
- Comes with pulley bearing pressed & ready for installation
- Installation may require additional components depending on application
-
Upgrade your factory cylinder studs & head bolts to these high performance versions manufactured by ARP for Feuling. Used in all DarkSide high performance Milwaukee 8 builds.
- Manufacturer Part No: FE-3007
- 12 point head bolts UHL 3.215
- Special alloyed stainless steel head bolts
- Designed for maximum performance, horsepower & reliability
- Reusable with precision J Form threads for optimum engagement to prevent galling & promote more consistent torque loading
- Kit includes 8 x head bolts, moly assembly lubricant & thread sealant
- Installation requires specific torque specs & methods
-
Our new rear drive pulley to suit OEM 2023-On Breakout rims is now here & the highest quality option available on the market.
- Manufacturer Part No: DS-RP-66T-2R / DS-RP-66-2B
- Fully CNC machined from high quality billet
- Designed to suit Breakout style rims on 2023 - on Breakout models
- Comes in raw or a powder coated gloss black finish ready for installation
- Installation may require additional components depending on application
-
Our new rear drive pulley to suit OEM 2018 - 2022 Breakout rims is now here & the highest quality option available on the market.
- Manufacturer Part No: DS-RP-66-2R / DS-RP-66-1B
- Fully CNC machined from high quality billet
- Designed to suit Breakout style rims on 2018 - 2022 Breakout models
- Comes in raw or a powder coated gloss black finish ready for installation
- Installation may require additional components depending on application
-
The Milwaukee 8 models are renowned for their failing compensator sprockets straight from the factory. We've heard time & time again of stock standard bikes destroying them, but we have a fix. Our direct replacement Milwaukee 8 Compensator is made from high grade steel & has been proven to withstand the pressures of bikes pushing out over 250HP. A quick & easy change to ensure your bike is reliable not only for regular riding, but for any engine upgrades pushing out over 100HP. Our latest Breakout build, the most powerful Milwaukee 8 motor in Australia, is rolling around with one of these! Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
-
Complete clutch kit to suit 2008 - 2017 V-Rod. Suited for high performance applications. Includes all friction & steel plates required along with custom made springs. This kit has been tried & tested over the years to suit all our forced induction V-Rod builds. Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
